PCBA Functional Test System (FCT)
Drawer-type fixture with 0.6 mm minimum test pitch
Overview
After SMT, a board has to be tested and programmed before it goes into an assembly. Combining both in one fixture saves a handling step and, more importantly, avoids programming a board that has already failed a functional test.
The system handles single boards and panelised boards, with a minimum test point pitch of 0.6 mm. The drawer structure brings the board to the probe field without lifting it over the fixture frame, and upper and lower probe modules plus the wireless board can be swapped when the model changes.
Probe points, board tolerances, contact strategy, and test coverage are confirmed against controlled drawings and a physical sample — the published capability describes the platform, not a guarantee for every board layout.
Specifications
Features
- Test and programming in one fixture, so failed boards are never programmed
- Drawer loading with interchangeable probe modules for model changeover
- Handles single boards and panels
- Minimum test pitch of 0.6 mm for dense boards
Typical applications
- SMT post-assembly FCT
- Firmware programming
- PCBA functional screening
Discuss this configuration
Send the device details and the measurement you need to make. We will confirm which specifications are fixed and which need verification on your sample.
Contact engineering
