AT5016plus Planar Scanning Coupling Box
Fixed multi-probe array for tablet near-field coupling, no per-test antenna repositioning
Overview
Most coupling stations make an operator move the antenna for each band and each channel. AT5016plus removes that step. A fixed multi-probe array sits over a 200 × 300 mm coverage area, and RF switching selects the probe path, so a multi-antenna sweep runs as a sequence rather than a mechanical adjustment.
Because probe position never changes, the coupling factor stays constant between units. That is what makes the station usable for calibration work as well as production pass/fail: you are comparing like with like across the whole run.
Shielding is specified above 90 dB from 600 MHz to 6 GHz and at 18 GHz. The 200 × 300 mm figure is the antenna coverage area, not the internal cavity dimension. Signalling and non-signalling modes, EIRP/EIS correlation, and de-sense diagnostics are configured against the instrument and software you intend to use.
Specifications
Features
- Fixed probe array means no antenna repositioning between bands or channels
- Constant coupling factor across a run, which supports calibration use as well as screening
- Switched RF paths select probe combinations in software
- Supports EIRP/EIS correlation and de-sense diagnostics alongside pass/fail testing
Typical applications
- Tablet RF calibration
- Multi-antenna production screening
- De-sense troubleshooting
Discuss this configuration
Send the device details and the measurement you need to make. We will confirm which specifications are fixed and which need verification on your sample.
Contact engineering
