Products
38 product families across shielded enclosures, RF components, production test systems, and interface accessories. Each is configured around the device and the measurement, and the specifications that depend on your application are confirmed in the quotation.
RF Shielded Enclosures 9
Manual, pneumatic, and drawer-type shielded enclosures from benchtop size to integrated two-position test stations. Every unit is configured around the device, the bands, and the feed-through complement rather than supplied as a fixed catalogue item.
Acoustic Test Enclosure for Audio Production
A floor-standing acoustic isolation cabinet that creates a stable, low-noise environment for audio testing of phones, …
Dual-Level Pneumatic Shield Box for ONT Testing
A dual-level pneumatic RF shielded enclosure built for ONT and ONU production stations, with side-mounted pneumatic ac…
Compact Manual Shield Box, Hinged Lid
A compact benchtop RF shielded test enclosure with a lift-up hinged lid held open by gas struts, sized for small modul…
Portable Manual Shield Box, Front Access
A portable metal RF test enclosure with a hinged front door, sized for loading complete units and cabled assemblies up…
Portable Manual Shield Box, Top Opening
A portable metal RF test enclosure with a clamshell lid secured by two toggle latches, held open by a side strut, and …
Pneumatic Shield Box, Top Opening
A benchtop RF shielded enclosure with a side-mounted pneumatic cylinder driving a top-opening lid, front panel control…
QT4630W Drawer-Type RF Shield Box
A drawer-type RF shielded enclosure for 3C device coupling tests, taking general-purpose fixtures and supporting autom…
SMT Board-Level Download Shield Box
A shielded enclosure for PCB-level firmware download on routers, tablets, phones, and wireless modules, with a dual-sl…
Pneumatic Drawer Abnormal Noise Test Enclosure
An integrated acoustic test cabinet for automated abnormal-noise detection on production lines, with a pneumatic drawe…
RF Components 10
Step and programmable attenuators, matrix and SPDT switches, high-pass filters, low noise amplifiers, and phase-stable test cables. These are the parts that sit between the instrument and the device and decide whether the measurement holds.
Push-Button Step Attenuator, 0–90 dB, 1 dB Steps
A 50 Ω push-button step attenuator covering DC–3 GHz with 0–90 dB in 1 dB increments, using eight latching keys so att…
RF High-Pass Filter, 3–18 GHz
A 50 Ω SMA-female high-pass filter with a 3.0 GHz cutoff and 3.0–18 GHz passband, providing at least 60 dB rejection f…
SP4T RF Switch, USB Controlled
A 50 Ω SP4T solid-state RF switch routing one input to any of four outputs, controlled over USB Type-C with AT command…
Manual Rotary Step Attenuator, DC–6 GHz
A 50 Ω manual rotary step attenuator covering DC–6 GHz with 0–100 dB in 1 dB increments, adjusted by a calibrated dial…
4×16 Matrix RF Switch, QT4P16T
A 4-input, 16-output solid-state matrix RF switch that expands a wireless test set to 16 antenna ports, covering 0.5–6…
Programmable Attenuator, 4×4, 0.6–6 GHz
A multi-channel programmable attenuator with four inputs and four outputs covering 0.6–6 GHz and 0–110 dB, controllabl…
Low Noise Amplifier MI058, 1–18 GHz
A 1–18 GHz low noise amplifier for RF test chains, providing 30 dB gain with a 4.0 dB noise figure and 15 dBm output c…
SPDT RF Switch, TTL/USB Controlled
A 50 Ω SPDT solid-state RF switch routing one input to two outputs across 0.1–8 GHz, with over 70 dB isolation to 3 GH…
RF Test Cable QT Lab-TS405, 800 MHz–6 GHz
A 50 Ω RF test cable from 800 MHz to 6 GHz with SMA male to right-angle SMA male connectors, 0.85 dB insertion loss at…
USB 3.2 Gen 2×2 Type-C Filter Panel
A Type-C filter feed-through for shield rooms and enclosures, passing USB 3.2 Gen 2×2 at 20 Gbps and up to 100 W while…
Production Test Systems 15
Multi-antenna coupling stations, automated RSSI cells, ECG and UWB test platforms, PCBA functional test, and vision inspection. Designed to be loaded once, run a full test plan, and hand a pass or fail decision back to the line.
Automated RSSI Test Station for Laptop Production
A conveyor-fed RF shielded test cell that measures received signal strength on 11–17 inch laptops at production line s…
POS and Payment Terminal RF Shield Testing
A configured RF shielded test setup for payment terminals and smart POS devices, covering wireless transceiver perform…
AT5016plus Planar Scanning Coupling Box
A planar scanning near-field coupling enclosure for 12-inch tablets and wireless terminals, using a fixed multi-probe …
5G Smartphone Multi-Antenna Test Station
A turnkey multi-antenna RF production test station for phones and tablets, combining a shielded enclosure, automated f…
UWB Production Test Enclosure
A shielded test environment with an automated fixture for UWB terminals, configured around RF performance, antenna con…
ECG Test Station for Wearable Devices
An ECG function test station for smartwatches and wearables, with four test positions and configurable parallel or seq…
Near-Field Coupling Matrix Antenna
A near-field coupling antenna array with an integrated RF switch and eight cross-polarised antenna pairs, covering pho…
Inline Automated Coupling Test System
An inline coupling test system for phone production that integrates barcode reading, product positioning, test-flow sw…
RSE Spurious Emission Test Platform
A radiated spurious emission test platform for 3C devices, using coupling probes and general-purpose fixtures for posi…
Drawer-Type Coupling Test for Tablets and Laptops
A drawer-type multi-antenna coupling test system for 8–14 inch tablets and laptops, supporting manual and automated op…
Wearable RF Test Platform
A whole-unit RF coupling test platform for bands, watches, and TWS earbuds, combining a shielded enclosure with an aut…
PCBA Functional Test System (FCT)
A functional circuit test system for 3C product PCBA after SMT, providing test and firmware programming with a drawer-…
UWB RF Test Equipment for 3C Devices
RF test equipment for whole-unit UWB testing on 3C electronic products, selected against the terminal model and the pr…
Vision Defect Inspection Platform
A machine vision inspection platform that checks product appearance and geometric features, supports multi-model switc…
Dual-Position Drawer RF Shield Test Station
A self-contained test station combining two drawer-type shielded cavities, an instrument bay, and an industrial touchs…
Control & Interface Accessories 4
USB control boards, TTL serial modules, self-mating test connectors, and line communication antennas — the interface layer that makes a fixture controllable and serviceable.
Dual USB Serial Control Board
A dual USB serial control board for USB signal switching and control in test systems, with a 32-bit MCU, FT232RL seria…
USB to TTL Control Module
A USB to TTL serial control module for test system integration, with a 32-bit MCU, FT232RL and CH340 serial chips, and…
5.15–5.8 GHz WiFi Antenna for Line Equipment
A 5.15–5.8 GHz linearly polarised antenna with 4 dBi gain and 90° beamwidth in both planes, used for wireless communic…
USB Self-Mating Test Connector
A USB self-mating connector assembly designed for automated test fixtures, handling contact, insertion, extraction, an…
Discuss this configuration
Send the device details and the measurement you need to make. We will confirm which specifications are fixed and which need verification on your sample.
Contact engineering