RF Components
Step and programmable attenuators, matrix and SPDT switches, high-pass filters, low noise amplifiers, and phase-stable test cables. These are the parts that sit between the instrument and the device and decide whether the measurement holds.
Push-Button Step Attenuator, 0–90 dB, 1 dB Steps
A 50 Ω push-button step attenuator covering DC–3 GHz with 0–90 dB in 1 dB increments, using eight latching keys so att…
RF High-Pass Filter, 3–18 GHz
A 50 Ω SMA-female high-pass filter with a 3.0 GHz cutoff and 3.0–18 GHz passband, providing at least 60 dB rejection f…
SP4T RF Switch, USB Controlled
A 50 Ω SP4T solid-state RF switch routing one input to any of four outputs, controlled over USB Type-C with AT command…
Manual Rotary Step Attenuator, DC–6 GHz
A 50 Ω manual rotary step attenuator covering DC–6 GHz with 0–100 dB in 1 dB increments, adjusted by a calibrated dial…
4×16 Matrix RF Switch, QT4P16T
A 4-input, 16-output solid-state matrix RF switch that expands a wireless test set to 16 antenna ports, covering 0.5–6…
Programmable Attenuator, 4×4, 0.6–6 GHz
A multi-channel programmable attenuator with four inputs and four outputs covering 0.6–6 GHz and 0–110 dB, controllabl…
Low Noise Amplifier MI058, 1–18 GHz
A 1–18 GHz low noise amplifier for RF test chains, providing 30 dB gain with a 4.0 dB noise figure and 15 dBm output c…
SPDT RF Switch, TTL/USB Controlled
A 50 Ω SPDT solid-state RF switch routing one input to two outputs across 0.1–8 GHz, with over 70 dB isolation to 3 GH…
RF Test Cable QT Lab-TS405, 800 MHz–6 GHz
A 50 Ω RF test cable from 800 MHz to 6 GHz with SMA male to right-angle SMA male connectors, 0.85 dB insertion loss at…
USB 3.2 Gen 2×2 Type-C Filter Panel
A Type-C filter feed-through for shield rooms and enclosures, passing USB 3.2 Gen 2×2 at 20 Gbps and up to 100 W while…
Discuss this configuration
Send the device details and the measurement you need to make. We will confirm which specifications are fixed and which need verification on your sample.
Contact engineering